Input and output:8balanced microphone/Line input uses Phoenix plug interface,8Circuit balanced output, using Phoenix plug interface;
Network port: The back panel of the device has1aRJ45Network port forPCControl equipment through software;
USBPort: comes with the back panel of the deviceUSBSound card recording and playback interface, through thisUSBPort realizes recording and playback function, and the device supports itWAVLossless music format playback and recording can be set in the device software interfaceUSBSpecific functions of playback and recording, and the playback and recording volume control is controlled in the software interface, and the maximum playback gain value can be set. It is intuitive and practical. Through this port, you can support access to remote conference audio.
Listening port: The front panel has a6.35mmHeadset monitoring port, which allows you to control the volume through software;
Serial port: The rear wiring board has1aRS-232、1aRS-485Port, connected to central control through the port, supports automatic camera tracking function, and easily realizes video conferencing,Can send or receive controls, such as video matrices, cameras and other equipment;
Camera tracking: The software has special camera tracking control functions, including voice tracking control module (with adjustments such as tracking threshold, default mic, reaction time, switching back to default mic time, rotation interval, rotation number, etc.), microphone setting module (Support64camera addresses,64preset points, with microphone number, serial port type selection, camera address selection, protocol selection, preset point selection, priority selection), camera setting module (supportsPELCO_D、PELCO_P、VISCA、CUSTOMProtocol, with serial port type, camera address, protocol, PTZ speed, zoom magnification, zoom reduction, tuning-Near and telomization-Distance and aperture-Large, aperture-small settings), prefabricated point control module (64preset points with call, save, and clear settings);
GPIOPort:4 Path definable input/Output logic level control port, maximum support 0-5V Voltage input or dry contact signal The signal is used to trigger a processor action, or output after triggering an action5V Used to drive relays and other equipment;
Central control code generator: The software comes with a central control code generator, which is convenient to connect with the central control equipment;
Reset button: The rear wiring board of the equipment has11 hidden button for restoring factory settings;
Processing:24bit/48KHzSampling frequency, high performanceA/D D/Aconverter and32-bitfloating point DSPProcessor;
Input sensitivity adjustment:0dB、6dB、12dB、18dB、24dB、30dB、36dB、42dB、48dB;
Software modules: The supporting software has a variety of audio processor modules: expander, compressor, automatic gain, parametric equalization, feedback suppression, automatic mixing, echo cancellation, noise suppression, high-low pass (frequency divider), tuning push rod, delay device, limiter, input and output channel mute, inversion, matrix, signal indication level meter, output selector dividerAnalog(analog signal)there aredante、CobraNet、AES/EBU、MADI、EtherSound、Optical、Coaxialetc.;
Input selection: Each input channel can be selected from the software interfaceAnalog(analog signal)there aredante、CobraNet、AES/EBU、MADI、EtherSound、Optical、Coaxial、N-net, sine wave, white noise, pink noise and other test signal inputs are available for users to choose according to system construction and debugging needs;
One-button mute: The software has a one-button mute function, which is convenient for users to control emergency;
Software Download: Built-in processorPCDebugging software, you can log in directlyIPAddress to download operating software.
Technical parameters:
Processor:ADI SHARC 21489
harvesting rate/Quantified bits:48K/24bit
Input and output: Input8, output8
GPIO Mouth:GPIO*4
Number of serial ports:RS232*1+RS485*1
USBSound card:1a
Headphone monitoring:1a6.35mmHeadphone monitoring port
Input gain: 0/6/12/18/24/30/36/42/48dB
Phantom power supply:+48V/10mA max
frequency response(20~20KHz)：±0.5dB
Maximum level:+18dBu
THD+N：<-92dB @17dBu
Enter dynamic range:110dB
Output dynamic range:110dB
channel isolation@1kHz: 108dB
input impedance(balanced connection)：5.4KΩ
output impedance(balanced connection)：600Ω
System delay:<3ms
Working power supply:AC 220V 50Hz
Product size (width x deep x high):482 x 205 x 45mm
Product weight:3KG
