Product introduction:
8Road manual power controller, built-in8a20ARelay, maximum load capacity4400W/Single way,(recommended2500WBelow) Use it with a programmable central control host,It also fully supports third-party equipment control, which is used to control lighting, electric projection screens, electric curtains and other peripheral equipment in the conference room.
functional characteristics
1.Protocol compatibility: Used with a programmable central control host, it also fully supports third-party device control.
2.Manual control: Right in front of the machine, there is8A touch switch allows you to manually control the switch of the relay in emergency situations. This function can be used when a special situation occurs on site to protect other equipment well.
3.has8Circuit relays, each relay has a terminal with three connection points, with normally open and normally closed functions;
4.has8Independent power switch control, single current support20A。
5.Equipped with equipment running status indicator and8Switch status indicators for each relay.
6.have1Road network interface.
7.The machine hasIDIdentification, when multiple units are controlled through the central control host network, you can use theIDIdentification.
Technical parameters:
1.Panel buttons:8Road independent power switch control (manual)
2.Loading capacity: single current20A
3.Power supply: Wide voltage universal power supply (DC24V）
4.Control method: ThroughRS-232orLANnetwork interface
5.RS-232Interface:RS485Interface; baud rate:9600, data bit:8, stop bit:1, check bit: none.
6.Network interface:RJ-45，100M
7.Overall size(LxWxH)：390×200×55(mm)
8.Weight:3.2Kg
9.Switching current (MAX）：20A
10.Maximum power consumption:7.2W
relay parameter
NO:30A/240VAC/14VDC
NC:20A//240VAC/14VDC
Control power supply:24VDC。
At initial power-on, all are disconnected.
