Product introduction:
8Road manual power controller, built-in8a20ARelay, maximum load capacity4400W/Single way,(recommended2500WBelow) Use it with a programmable central control host,It also fully supports third-party equipment control, which is used to control lighting, electric projection screens, electric curtains and other peripheral equipment in the conference room.
functional characteristics
1.Protocol compatibility: Used with a programmable central control host, it also fully supports third-party device control.
2.Manual control: Right in front of the machine, there is8A touch switch allows you to manually control the switch of the relay in emergency situations. This function can be used when a special situation occurs on site to protect other equipment well.
3.has8Circuit relays, each relay has a terminal with three connection points, with normally open and normally closed functions;
4.has8Independent power switch control, single current support20A。
5.Equipped with equipment running status indicator and8Switch status indicators for each relay.
6.Optional1Road network interface (optional function, model is:POWER2.8NET）。
7.The machine hasIDIdentification, when multiple units are controlled through the central control host network, you can use theIDIdentification (optional function, model number:POWER2.8NET）。。
Technical parameters:
1.Panel buttons:8Road independent power switch control (manual)
2.Loading capacity: single current20A
3.Power supply: Wide voltage universal power supply (DC24V）
4.Control method: ThroughRS-232Interface control,
5.RS-232Interface:RS485Interface; baud rate:9600, data bit:8, stop bit:1, check bit: none.
6.Network interface:RJ-45，100M(Optional)
7.Overall size(LxWxH)：390×200×55(mm)
8.Weight:3.2Kg
9.Switching current (MAX）：20A
10.Maximum power consumption:7.2W
relay parameter
NO:30A/240VAC/14VDC
NC:20A//240VAC/14VDC
Control power supply:24VDC。
At initial power-on, all are disconnected.
