product introduction
TRSeries network active slightly usesSONICPRO®Audio system is a third-generationCLASS-DDigital power amplification module, which has high conversion efficiency, small heat generation, stability and durability, and combinesDanteThe network audio transmission module port forms a high-end active speaker for digital and networked transmission. The back plate of the slightly has2aDanteNetwork audio input port, oneXLRInput and output,1There are two volume control knobs, and one is specially designed on the back panel of the slightlyRS232The control port can be connected to external central control and other equipment to control the volume of the slightly.
TRSeries slightly boxes adopt15Millimeter birch plywood and polyurea spraying process have good wear resistance and show product grade; symmetrical box design, the speaker surface is clean and tidy, and there are multiple boxes on the box surface.M8Specifications hoisting point, and there are bracket installation holes at the bottom of the slightly, which are suitable for hoisting, bracket installation and wall arm mount installation; power input and output are usedNeutrik PowerConInterface.
TRSeries slightly is a built-in third-generationCLASS-DDigital power amplifiers andDanteNetwork active two-frequency slightly for network audio transmission is suitable for mobile sound reinforcement and fixed installation occasions. All high-pitched and low-pitched units are tailor-made by Europe's top speaker unit suppliers, and the treble part is44mmComposite film compression drive, combined with FRP anti-parabolic waveguide technology, horn can be made according to installation method90Rotation to obtain better sound field coverage; after careful correction by senior R & D engineers, it is ensured that high and low sound waves can reach the listener's ears at the same time, and edge distortions such as reflection and diffraction caused by traditional conventional horns are eliminated, ensuring sound image consistency and clarity. Continuous development of cutting-edge audio products has always beenSONIC PRO®What the sound pursues.
Type: Network active slightly (withDantetransmission)
Box composition: high-strength birch plywood, polyurea spraying process
Frequency response:38Hz-20KHz(-3dB)
Sensitivity:104dB 1.0W/1m
Sound pressure level:130dB(Continuous).136dB(Peak)
Input impedance:20KΩ
Rated power:700W
Peak power:2800W
Unit configuration:LOW:1×15"(European Custom Units)
HI:1×44mm(European Custom Units)
Power amplifier module: third generationClass-DClass high-power digital power amplification module
Network transmission method:RJ45Network port usesDanteAudio Transport Protocol
Control software:Dante controller
Connection port:2roadRJ45 DanteNetwork transmission port (Cascaded audio transmission from multiple slightly can be realized through the network port),1Lucano line input port,1LucannonLINKLine output port,1roadRS-232Communication port,1roadNEUTRIKpower input/output port
Coverage angle:90°(H)×60°(V) ，90°Rotatable FRP horn
Product size:425(wide)×480(deep)×690(high)mm
Weight:30.81kg
Hanging hardware:M8 Rigging point
